| Laser for detection emitting property | Infrared laser: 1 |
|---|---|
| Emitting property_Laser class | CLASS 1 |
| Emitting property_Wavelength band | 905nm |
| Emitting property_Max. pulse output power | 80W |
| Laser for installation emitting property | Visible light laser: 3 |
| Emitting property_Laser class | CLASS 3R |
| Emitting property_Wavelength band | 650 nm |
| Emitting property_Max. pulse output power | 4 mW |
| Min. size of the scanning target | Detection distance of 3m : 2.1×2.1×2.1 cm, Detection distance of 5m : 3.5×3.5×3.5 cm |
| Scanning frequency | 15 Hz |
| Response time | ≤ 20 to 80ms + monitoring time |
| Monitoring zone | 0.3×0.3 ~ 5.6×5.6 m |
| Angular resolution | 0.4° |
| Aperture angle | 90° |
| Object reflectivity | Min. 2% |
| Korean Railway Standards | KRS SG 0068 |
| Weight | ≈ 0.9 kg (≈ 1.1 kg) |
| Power voltage | 10 ~ 35 VDC |
| Power consumption | ＜ 10 W |
| Input | Photocoupler input: 1 H: ≥ 8 - 30 VDC, L: ≤ 3 VDC |
| Output | PhotoMOS relay output: 2 Resistive load: 35 VDC/ 24 VAC~, ≤ 80 mA |
| Vibration | Max. 2G (18.7m/s²) |
| Shock | 30G/18ms |
| Environment_Ambient illumination | ≤ 100,000 lx |
| Environment_Ambient temperature | -30 to 60 ℃, storage: -30 ~ 70 ℃ (no freezing or condensation) |
| Environment_Ambient humidity | 0 to 95 %RH, storage: 0 to 95 %RH (no freezing or condensation) |
| Protection structure | IP67(IEC standard) |
| Cable_Power, I/O | Ø 5 mm, 8-wire, 5 m |
| Cable_Ethernet | 5 mm, 4-wire, 3 m, shield cable, RJ45 connector |
| Core | AWG26 (0.16 mm, 7-core), insulator outer diameter: Ø 1 mm |
| Material | Case: AL, Window: PC |
| Communication interface | Ethernet |
| Sold separately | Main bracket: BK-LSE3, Sub bracket: BK-LSE2-SUB |
| Component_PC program | atLidar (laser scanner program) |
Applications
1. LSE3 can be used to monitor the height and bulge of the stacked material before storage and prevent it from exceeding its limits.
2. LSE3 can be used to prevent collisions for heavy equipment.
3. LSE3 can be used to detect vehicles installed at highway toll booths.
4. LSE3 can be used to detect pedestrian movement installed on pedestrian crossings.
5. LSE3 can be used to detect the entry/exit of the car installed on the warehouse door.
LSE3-4A10R2-EThttps://mwautomatech.com/lse3-4a10r2-et-lidar-sensor-autonics/
