LSC-C25CT3-ET 270° angle 25m distance Infrared laser sensor

Environment of use	Indoor
Emitting property	Infrared laser
Laser class	CLASS 1
Emitting property_Wavelength band	905nm
Emitting property_Max. pulse output power	6W
Beam conversion angle	9.5 mrad
Scanning frequency	15 Hz
Response time	Typ. 67 ms
Monitoring zone	0.05 ~ 25 m
Angular resolution	0.33°
Aperture angle	270°
Object reflectivity	Min. 4%
Weight	≈ 228 g (314 g)
Power voltage	9-28VDC
Power consumption	＜ 4 W
Input	4 Photocoupler inputs - H: ≥ 9-28 VDC, L: ≤ 3 VDC
Output signal	NPN-PNP open collector output setting (software)
Insulation resistance	≥ 5 MΩ (500 VDC megger)
Dielectric strength	500VAC 50/60Hz for 1 minute
Vibration	10 sweep cycles in each X, Y, Z axes at sine wave, 10 to 500 Hz, acceleration 5 G
Environment_Ambient illumination	≤ 80,000 lx
Environment_Ambient temperature	-10 to 50 ℃, storage: -30 to 70 ℃ (no freezing or condensation)
Environment_Ambient humidity	0 to 95 %RH, storage: 0 to 95 %RH (no freezing or condensation)
Protection structure	IP67(IEC standard)
Connector type	Power I / O: M12 12-pin, Ethernet: M12 8-pin
Material	Case: AL, Window: PC
Communication interface	Ethernet

Applications

1. It can be used for AGV (automated guided vehicle) AMR (autonomous mobile robot) for obstacle avoidance or natrual nagivation.

2. It can be used to check position of materials within trays during material discharge.

3. It can be installed at the entrance gates to prevent forklift collisions.

4. It can be used to identify the inner condition of turnover boxes on shipping conveyor belts.

5. It can detect occupancy status of tray and to detect size of pallet for pick-up.

6. It can help to prevent collisions between objects in OHT equipment operation for semiconductor/display Industry. OHT : An automated transport system that moves on the overhead track.